Sony Cyber-shot DSC-RX10M3 Instruction Manual page 27

Dial/Wheel Lock
(Wireless)
Send to Smartphone
Send to Computer
View on TV
One-touch(NFC)
Airplane Mode
WPS Push
Access Point Set.
Edit Device Name
Disp MAC Address
SSID/PW Reset
Reset Network Set.
(Application)
Application List
Introduction
Sets whether to disable the control dial and the
control wheel temporarily by using the Fn button
when shooting. You can disable/enable the control
dial and the control wheel by pressing and holding
down the Fn button.
Transfers images to display on a smartphone.
Backs up images by transferring them to a computer
connected to a network.
You can view images on a network-enabled TV.
Assigns an application to One-touch (NFC). You can
call up the application when shooting by touching an
NFC-enabled smartphone to the camera.
You can set this device to not perform wireless
communications.
You can register the access point to the camera easily
by pushing the Wi-Fi Protected Setup™ (WPS)
button.
You can register your access point manually.
You can change the device name under Wi-Fi Direct,
etc.
Displays the MAC address of the camera.
Resets the SSID and password of smartphone
connection.
Resets all network settings.
Displays the application list. You can select the
application you want to use.
Displays instructions on using the application.
GB
27