Wiring To Model 6506 Damper; Operation - Aprilaire 8126 Series Installation And Operation Manual
Digital ventilation controller
Hide thumbs
Also See for 8126 Series:
- Owner's manual (2 pages) ,
- Installation instructions (2 pages) ,
- Safety & installation instructions (6 pages)
Table of Contents
Advertisement
FIGURE 4 – WIRING TO MODEL 6506 DAMPER
VENT
24 VAC
120 VAC
24 VAC, 10VA TRANSFORMER
PROVIDED WITH MODEL 8126X
4. Route the wires into the
channels in the back of the
WIRE
control to either the top or
CHANNEL
bottom of the control and
snap the control onto the
wall plate .
5. Restore power to the HVAC
system when complete .
MODEL 6506 DAMPER
PROVIDED WITH MODEL 8126X
12
OPERATION
The display will appear faint normally; the first press of any button will turn on the display at full
power .
mode of operation (Code or Comfort) and whether
the HVAC fan has been turned on when ventilating .
Use for
Rater/Inspector
Verification .
Press and hold
for 5 seconds to
enter Test Mode
or Set Up Menu .
Lights green
when ventilating .
90-2266
Shows the ventilation time setting (minutes/hr),
CODE
MIN/
HR
13
Use to override the
calculated ventilation
time setting (6 – 60
minutes/hr) . Press
and hold
to turn
ventilation OFF .
To return to the
calculated setting, go
completely through
the Set Up Menu .
Advertisement
Table of Contents
