Network; General - TRENDnet TV-NVR216D4 User Manual

16-channel hd poe+ nvr
Hide thumbs Also See for TV-NVR216D4:
Table of Contents

Advertisement

 
TRENDnet User's Guide
 
Network 
Set up NVR network, DDNS, NTP, Email, and UPnP settings. 
General 
Setup the network interface connecting to the Internet. 
 
Network General Settings 
NIC Type:  Choose one of the Ethernet duplex and speed to 
match your network. Default: 10/100M Auto 
detection. 
Enable DHCP:  Check this box if the IP address is assigned by DHCP 
server. 
IPv4 Address:  The IPv4 dynamic or static address 
IPv4 Subnet Mask:  Network range of the subnet 
IPv4 Default 
The default route going further from TV‐IP320PI IPv4 
Gateway: 
subnet 
 
© Copyright 2016 TRENDnet. All Rights Reserved. 
 
 
 
 
IPv6 Address 1:  IPv6 self‐assigned address including the subnet prefix 
expression in the end of the string. 
IPv6 Address 2:  IPv6 static address including the subnet prefix expression 
in the end of the string. 
IPv6 Default 
The default route going further from IPv6 subnet 
Gateway: 
MAC Address:  The MAC address of the NVR network interface. 
MTU:  Maximum transmission unit. The maximum field size 
in the Ethernet packet. Default: 1500 
Preferred DNS:  Enter your first IPv4 or IPv6 DNS server address 
Alternate DNS:  Enter your second IPv4 or IPv6 DNS server address 
 
Click Apply to apply the changes. 
 
TV‐NVR216 / TV‐NVR216D4 
 
 
 
 
 
  
 
 
38 

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tv-nvr216

Table of Contents