Table of Contents
Advertisement
& HD Audio Azalia Device
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& USB DAC Power
Enables or disables the power for the USB DAC connector on the back panel. For a USB DAC that has
independent power, set this item to Disabled. (Default: Enabled)
& Onboard USB Device
Enables or disables the integrated USB controller. (Default: Enabled)
& Onboard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& Onboard USB3.0 Controller (VIA
Enables or disables the VIA
& Onboard USB3.1 Controller (ASMedia
Enables or disables the ASMedia
& Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
& XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)
& EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
& Port 60/64 Emulation
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)
& USB Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
& IOMMU Controller
Enables or disables AMD IOMMU support. (Default: Disabled)
` SB SATA Configuration
& SATA Hot Plug on PORT0~SATA Hot Plug on PORT5
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& SATA Power on PORT0~SATA Power on PORT5
Enables or disables each SATA port. (Default: Enabled)
` Super IO Configuration
This section provides information on the super I/O chip and allows you to configure the serial port.
& Serial Port A
Enables or disables the onboard serial port. (Default: Enabled)
` NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
VL805 USB Controller)
®
VL805 USB controller. (Default: Enabled)
®
USB 3.1 Controller)
®
USB 3.1 controllers. (Default: Enabled)
®
- 29 -
Advertisement
Table of Contents
