Gigabyte GA-970-Gaming User Manual page 23

& Core C6 State
(Note 1)
Allows you to determine whether to let the CPU enter C6 mode in system halt state. When enabled, the
CPU core frequency will be reduced during system halt state to decrease power consumption. The C6
state is a more enhanced power-saving state than C1. (Default: Enabled)
& HPC Mode
(Note 1)
Allows you to determine whether to enable High Performance Computing (HPC) mode for the CPU. Enabled
prevents the CPU frequency from being lowered during system halt state. (Default: Disabled)
& APM (AMD Application Power Management)
Enabled D ynamically monitors the power consumption of the CPU cores and automatically
optimizes the CPU to its best performance level. (Default)
Disabled Disables this function.
& Extreme Memory Profile (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled Disables this function. (Default)
Uses Profile 1 settings.
Profile1
Uses Profile 2 settings.
(Note 2)
Profile2
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Frequency (MHz)
This value is automatically adjusted according to the BCLK Clock Control and System Memory Multiplier
settings.
` Advanced Memory Settings
& Extreme Memory Profile (X.M.P.)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& DRAM Timing Selectable
Quick and Expert allows the memory timing settings below to be configurable. Options are: Auto (default),
Quick, Expert.
& Profile DDR Voltage
When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled, the value
is displayed according to your memory specification. When Extreme Memory Profile (X.M.P.) is set to
Profile1 or Profile2, the value is displayed according to the SPD data on the XMP memory.
& Profile VTT Voltage
The value displayed here is dependent on the CPU being used.
& Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
automatically configure this setting. (Default: Auto)
& Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
configure this setting. (Default: Auto)
(Note 1) This item is present only when you install a CPU that supports this feature.
(Note 2) This item is present only when you install a memory module that supports this feature.
(Note 1)
(Note 2)
, System Memory Multiplier, Memory Frequency(MHz)
(Note 2)
- 23 -