M-Vision Dashboard; M_Sw1: M-Vision Switch - MSI MEG Z690 GODLIKE User Manual

M-VISION Dashboard

The M-VISION Dashboard can be used to display system information, CPU
temperature, CPU speed, BIOS flash status and error message. You also can power
on/ off the system and launch the MSI Center, Youtube, music APP, browser of the
system by touching the M-VISION Dashboard. You can use MSI's software to configure
and customize the M-VISION Dashboard Advanced mode and even upload a .gif/ .bmp/
.png/ .jpg or .mp4 animation file.
Connecting the M-VISION Dashboard
You can also remove the M-VISION Dashboard from the motherboard and it still can
be activated. Please follow the steps below to connect M-VISION Dashboard to the
motherboard.
1. Remove the M-VISION Dashboard from the motherboard.
2. Use the supplied M-VISION cable to connect the M-VISION Dashboard and
specified USB port (M-VISION Dashboard port) on the back panel.
3. Switch the M-VISION switch (M_SW1) to the M-VISION mode.

M_SW1: M-VISION switch

M-VISION mode:
for M-VISION Dashboard
3
Normal mode (Default):
for USB device
M-VISION Dashboard Port
10 Gb LAN
2
M-VISION Dashboard
1
M-VISION cable
Overview of Components
2
47