Projector Reset Options - Reset Menu - Epson Pro EX9220 User Manual

Event ID code
0892
0893
0894
0898
0899
Parent topic:

Projector Reset Options - Reset Menu

You can reset most of the projector settings to their default values using the Reset All Config option on
the Reset menu.
You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset
Lamp Hours option.
Cause and solution
The WPA/WPA2 authentication type does not match. Make sure the wireless
network security settings are correct.
The TKIP/AES encryption type does not match. Make sure the wireless network
security settings are correct.
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.
If you are not using DHCP, turn off the DHCP setting in the Network menus.
A communication error has occurred.
Projector Information Display - Info Menu
150