Samsung Xpress M2070FW User Manual page 195

System setup
Item
Prints a transmission report including the fax
number, the number of pages, the elapsed time
of the job, the communication mode, and the
Fax Confirm. communication results for fax job. You can set up
your machine to automatically print a
transmission confirmation report after each fax
job.
Prints information on the faxes you have recently
Fax Sent
sent.
Prints information on the faxes you have recently
Fax Received
received.
Prints the document list currently stored for
Schedule Jobs delayed faxes along with the starting time and
type of each operation.
Prints the fax numbers specified as junk fax
JunkFax
numbers.
Prints information on your machine's network
Network Conf.
connection and configuration.
Description
10
Maintenance
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
To change the menu options:
• Press (Menu) > System Setup > Maintenance on the control panel.
• Or press Setup > Machine Setup > Initial Setup.
Item
When toner cartridge is empty, this option appears. You
CLR Empty Msg.
can clear the empty message.
Shows the supply life indicators (see "Monitoring the
Supplies Life
supplies life" on page 74.)
Customizes the level to alert toner low or toner empty
TonerLow Alert
(see "Setting the toner low alert" on page 75).
Shows the machine's serial number. When you call for
Serial Number service or register as a user on the Samsung website, you
can find this.
Description
195
3. Useful Setting Menus