Table of Contents
Advertisement
For a comfortable sleep, the air conditioner will operate in 3 stages in order of Fall asleep Sound sleep Wake up stage .
When the air conditioner is operating in Cool/Heat mode;
Remote controller display
You can adjust the set temperature by 1 °C within the range of 16 °C~30 °C.
Fan speed will be adjusted automatically according to the
However, If you select
When the
In Cool mode: Air flow direction will be adjusted automatically.
In Heat mode: Adjusting air flow direction is available.
Temperature and fan speed change in
• Fall asleep: Eases you into sleep by dropping the temperature .
• Sound sleep: Relaxes your body and raises your temperature slightly .
• Wake up: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed .
• Recommended set temperature is between 25 °C ~ 27 °C for cooling and 21 ˚C~23 ˚C for heating.
• If the set temperature is too low, you may feel cold during sleep or catch a cold .
• Optimal operation hour of
may not feel as comfortable as you would expect .
• If the
operation time and the air conditioner will stop automatically .
• When the On timer and the
the function that was set later .
RC_BORACAY_IB&IM_EN_DB68-05679A-00.indd 19
mode
1 . Press the Timer button to select (
- (
) indicator will keep blinking and you can set the time .
2 . Press the
- You can set the time in half hour unit from 30 minutes (0 . 5 on the display) ~
3 hours and hour unit from 3~12 hours .
- Time can be set from minimum 30 minutes to maximum 12 hours .
- Default time setting for the
3 . Press the SET button to complete the
- (
) indicator and the set time of the
the remote controller display .
-
-
10 seconds after setting the time . Therefore, check for the (
remote controller display and the
display .
f Press the Timer button select (
f
Cancel
set the timer to
Additional options available in
mode is on.
mode is 8 hours . Therefore, if the time is set too short or long, you
mode is set over 5 hours, Wake up stage will begin when 1 hour is remaining in the
) .
,
button to set the time .
indicator (
) will be displayed on the indoor unit display .
mode setting will be cancelled if you don't press the SET button within
press the SET button .
mode
mode while heating operation is on, you can adjust fan speed.
mode
function is set simultaneously, the air conditioner will only apply
English-19
mode is 8 hours .
mode setting .
mode will be displayed on
) indicator on the
indicator (
) on the indoor unit
) press the
or
button
mode.
2/1/2016 2:18:51 PM
Advertisement
Table of Contents
