Table of Contents
Advertisement
12. Others
Monitor and viewfinder do not switch when [LVF] is pressed.
• It is only displayed on the monitor when the camera is connected to a PC or printer.
Unevenly bright parts or irregular colors appear on the Viewfinder.
• Viewfinder of this unit adopts OLED. Screen burn-in may occur on the screen/viewfinder when
a same image is displayed for a long period of time, but it does not affect the recorded images.
The color tone of the viewfinder differs from the actual tone.
• Being a characteristic of the viewfinder of this unit, this phenomenon is not a problem.
Recorded images are not affected.
Playback
The picture is not played back.
There are no recorded pictures.
• Is the card inserted?
• Is this a folder or picture which was processed in the PC?
If it is, it cannot be played back by this unit.
> It is recommended to use the software "PHOTOfunSTUDIO"
PC to card.
• Has [Playback Mode] been set for playback?
> Change to [Normal Play].
Cannot play back motion pictures.
• Motion pictures recorded with a different [System Frequency] setting cannot be played back.
(P240)
> Return the [System Frequency] setting to the one you used during the recording.
Red part of the recorded image has changed color to black.
• When Red-Eye Removal ([
> We recommend recording images with Flash Mode set to [‰] or [Red-Eye Removal] set to
[OFF].
(P214)
(P248)
] or [
]) is performed, red parts may be corrected to black.
334
(P311)
to write pictures from
Advertisement
Table of Contents
