Panasonic Lumix DC-GH5EFK Owner's Manual For Advanced Features page 271

10. Using the Wi-Fi/Bluetooth function
Using a password to set up a connection
Connecting with a password further enhances security. You can scan a QR code or
manually enter a password to set up a connection.
Preparations:
(On the camera) Set the [Wi-Fi Password] to [ON].
Using the QR code to set up a connection
∫
On the camera
Select the menu. (P55)
> [Setup] > [Wi-Fi] > [Wi-Fi Function] >
MENU
[New Connection] > [Remote Shooting & View]
A SSID and password
B QR code
• When the camera is ready to be connected to the smartphone,
the QR code, SSID and password are displayed.
• You can also display the information by pressing [Wi-Fi] on the
camera.
On your smartphone
1
Start "Image App".
2
Select [QR code].
• When the smartphone is connected to a wireless access point, it may take time to display
[QR code].
• (For iOS devices) A confirmation screen will be displayed. Select [OK] to proceed.
3
Use the "Image App" to scan the QR code displayed on the screen of the
camera.
• If you press [MENU/SET] on the camera, the QR code will be enlarged.
If you are using an Android device, follow the steps up to here to complete the setup.
Proceed to the steps below only if you are using an iOS device (iPhone/iPod touch/iPad).
4
Install the profile.
• If a pass code is set on the smartphone, you need to enter it.
5
Press the home button to close the browser.
6
Turn on the Wi-Fi function in the smartphone's setting menu.
7
On the Wi-Fi setting screen, select the SSID displayed on
the camera.
8
Press the home button, and select "Image App" to display
"Image App ".
• (iOS devices) Steps
time on.
1 5
through are not required from the second
(P305)
271
Wi-Fi
0123456789ABC