Installation - Gear Head OM4000W User Manual

Optical wireless mouse

Installation:

NOTE: The pictures shown in the User's Manual are for demonstration purposes only. Your computer or product may look slightly different.

1. Remove the Battery Compartment Cover located on the bottom of your Mouse.

2. Install two AAA batteries into your Mouse following the battery orientation guide in the battery bay, and then replace the cover back

onto your Mouse.

3. Turn on your computer and wait for it to load.

4. Plug the Wireless USB Receiver into an available USB port on your computer. Your mouse will establish a connection with the

receiver and is ready to be used. If a connection is not established, there might be a high level of surrounding interference, press the

Connect button on the back of the Wireless USB Receiver, and then press the Connect button on the back of your Mouse.

5. Your computer will detect your Mouse and the necessary drivers will be installed automatically.

6. Your Mouse is now ready to be used.

Table of Contents