Advertisement
Installation:
NOTE: The pictures shown in the User's Manual are for demonstration purposes only. Your computer or product may look slightly different.
1. Press the Battery Compartment Cover Button and slide the cover off your Mouse. Install two AA batteries into your Mouse
following the battery orientation guide in the battery bay, and then slide the cover back onto your Mouse until it securely locks.
2. Turn on your computer and wait for it to load.
3. Plug the Wireless Dongle into an available USB port on your computer. Your mouse will establish a connection with the receiver and
is ready to be used. If a connection is not established, there might be a high level of surrounding interference, press the Connect
button on the Wireless Dongle, and then press the Connect button on your Mouse.
4. Your computer will detect your Mouse, and the necessary drivers will be installed automatically.
5. Your Mouse is now ready to be used.
4
Advertisement
