Bush Hog HDTH5 Operator's Manual page 99

LIFT PINS
Lift Pins 3 Pt Lift (Figure 3-5)
For Standard pt. lift attachment to tractor the Cat.I Lift Pins attach to the Lift Arms using 7/8" lockwashers and 7/8"
hex nuts.
Category II Adaptor Bushings (1-7/8" long x 1-7/16" diameter) are supplied in the Bag of Parts. These Adaptor
Bushings are used on the Category I lift pins when attaching the machine to a tractor with Category II lift arms and
when attaching the machine to a tractor equipped with a Quick Hitch system.
The 3-Point Hitch System on this mower has been designed for front to back
flotation when mowing on uneven terrain. The tractor lift arms should be
set such that the mower 3-Point lift arms are parallel to the ground in floating
position.
IMPORTANT: Scan this QR Code with your smart phone to link to the PAMI Safe
Implement Hitching Manual for more information on correctly connecting
agricultural tractors to implements. Or type in your internet browser the following
web address: www.algqr.com/hme
HDTH 5 & 6 Finish Mower 08/21
© 2021 Alamo Group Inc.
ASSEMBLY
Figure 3-5
Lift Arm
Category I
Lift Pin
Ops-0008-MISC
Assembly Section 3-7
Adaptor Bushing
Category l
Quick Hitch