Bush Hog HDTH5 Operator's Manual page 102

FRONT ROLLER KIT ASSEMBLY (OPTIONAL) (Figure 3-8)
1. Attach the Roller Mounting Brackets to the front of the deck using four 3/8" x 1-1/4" bolts, 3/8" flatwashers,
3/8" Lockwashers and 3/8" hex nuts as shown in (Figure 3-8) below.
2. Attach the Roller and Sleeve with the 1/2" x 6-1/2" bolt, two 3/4" flatwashers, and the 1/2" hex nut as shown
in (Figure 3-8) below.
Figure 3-8
1/2" x 6-1/2" Bolt
1Sleeve
(4) 3/8" x 1-1/4" Bolts
(4) 3/8" Flatwashers
(4) 3/8" Lockwashers
(4) 3/8" Hex Nuts
HDTH 5 & 6 Finish Mower 08/21
© 2021 Alamo Group Inc.
ASSEMBLY
R.H. Roller
Bracket
Roller
3/4" Flatwashers
Assembly Section 3-10
L.H. Roller
Bracket