Wall Mounting - Panasonic KX-TG9581 Operating Instructions Manual

Useful Information

Wall mounting

The base unit can be mounted on a wall by
changing the wall mounting adaptor's position.
Note:
R Make sure that the wall and the fixing method
are strong enough to support the weight of the
unit.
Base unit
1
To remove the wall mounting adaptor, push
down the release levers (A). Remove the
adaptor (B).
B B
A
2
A Turn the adaptor so that the words "UP
WALL" are facing up.
B Tuck the telephone line cord inside the wall
mounting adaptor.
C Connect the AC adaptor cord and
telephone line cord.
1
3
Insert the lower tabs of the adaptor into the
unit's bottom slots (A), then insert by pushing
70 For assistance, please visit http://shop.panasonic.com/support
TG95x_OI(en-en)_0722_ver110.pdf 70
4
B B
A
3
Charger
Drive the screws (
2
27.2 mm (1
2
down the levers of the adaptor into the upper
slots (B).
R The words "UP WALL" should be facing up.
A
B
Mount the unit on a wall then slide down to
secure in place.
R This product is compliant with the following
wall phone plate sizes (2 types).
1
1
83 mm (3 / inches)
4
2
102 mm (4 inches)
Fit the slots of the unit onto the
corresponding wall phone plate tabs for
3 4
( ) and ( ) respectively.
3
1
4
1
) (not supplied) into the wall.
1
/ inches)
16
A
B
3
4
2
2
1
2015/07/22 12:33:24