Gateway GTW-P42M102 Service Manual page 8

SPECIFICATION FOR GTW-P42M102 PLASMA DISPLAY VER1.0
2.4. Display Performance Requirements:
The data of display performance are measured based on the following.
Conditions unless otherwise specified.
a. Ambient temperature
b. Warm up period
c. Line input voltage :
d. Viewing distance
e. Display mode
f. Brightness condition
2.4.1 Maximum Resolution:
2.4.2 Horizontal Size (Standard)
Vertical Size (Standard)
2.4.3 Horizontal Size (Max.)
Vertical Size (Max.)
2.4.4 Maximum Brightness Level:
a. 100% center block white
pattern (mosaic)
b. raster background
2.5. Operation:
Main unit button
IR Remote Control
2.5.1 Adjustable Items:
AV/S-Video input
Y/CB/CR
Analog RGB input
DVI input
25 5 ℃ ℃ ℃ ℃
30 minutes Min.
100 Vac ~ 240 Vac (50 / 60 Hz)
Distance from screen is 81 cm
Test with window white pattern mode if not specified.
Press recall bottom to set default brightness
Support to 1280 x 1024
920 8 mm (for mode 1〜 〜 〜 〜 26)
518 8 mm (for mode 1〜 〜 〜 〜 26)
Mode 1~26 full-scan
Mode 1~26 full-scan
Timing Mode 1
More than 30FL
(while pressing recall button to set default brightness)
with contrast / brightness at Max. and black signal)
less than 0.4FL
Main power switch (power ON /OFF)
Power ON/OFF
Input Mode (TV AV1
Component2 RGB
Menu key -,+ Adjustment -,+
Power on/off
Input Mode (same as Main unit button)
Volume -,+ Wide , Video/S video
input:4:3/16:9/ZOOM1/ZOOM2
Analog RGB input :W4:3/W16:9
Menu -,+ Adjustment -,+ RECALL
PIP, POP, SWAP, MUTE
Brightness, Contrast, Color, Tint, Sharpness
Color Temperature
Brightness, Contrast, Vertical position, Vertical width,
Horizontal position, Horizontal width, Color Temperature,
Clock phase, Power Save
Brightness, Contrast, Vertical position, Vertical width,
Horizontal position, Horizontal width, Color Temperature,
Power Save
2-4
AV2 (S) Component 1
DVI TV run in cycle)