Gateway GTW-P42M102 Service Manual page 10

SPECIFICATION FOR GTW-P42M102 PLASMA DISPLAY VER1.0
6. RF
6.1 RF Sensitivity (Peak)
VHF CH 2 ~ CH 13
UHF CH 14 ~ CH 69
CATV CH A-5 ~ CH W+29
6.2 AFT Pull-In Range
VHF CH 2 ~ CH 13
UHF CH 14 ~ CH 69
CATV CH A-5 ~ CH W+29
6.3 Picture IF Rejection
VHF CH 2 ~ CH 13
UHF CH 14 ~ CH 69
CATV CH A-5 ~ CH W+29
6.4 Picture Image Rejection
VHF CH 2 ~ CH 13
UHF CH 14 ~ CH 69
CATV CH A-5 ~ CH W+29
6.5 AGC Characteristics
AGC Figure Of Merit
RF signal range in which video at PDP drops 6 dB from output level obtained
with 100mV input.
6.6 RF AGC Cut In Level
6.7 FM/AM Rejection (100mV at SIF input)
6.8 Noise Limits Sensitivity
7. RELIABILITY REQUIREMENT:
The MTBF is 20000hrs under normal operation (environment temperature=25 5℃ ℃ ℃ ℃ , half
luminosity, motion picture)
8. REGULATORY REQUIREMENTS:
8.1 Safety Requirement:
a. UL
b. CSA
c. TUV
8.2 Emission Requirement:
The unit shall meet the EMI limits in all screen modes. For EMI testing, the unit must be
tested with the screen pattern consisting of scrolling capital "H" characters also the
brightness contrast will be adjusted to max. Level.
a. FCC class B part 15
8.3 Transit test
a. Drop Test
30dB Max.
30dB Max.
30dB Max.
± ± ± ± 0.6MHz Min.
± ± ± ± 0.6MHz Min.
± ± ± ± 0.6MHz Min.
50dB Min.
50dB Min.
50dB Min.
40dB Min.
35dB Min.
35dB Min.
50dB Min.
55dB ± ± ± ± 2dB
14dB min
VHF 45dB max
UHF 49dB max
Safety of information technology equipment including
electrical business equipment
Safety of information technology equipment including
electrical business equipment
2-6
200mm max.