Selecting A Drive Mode - Panasonic Lumix DMCLX100S Basic Owner's Manual

Advanced Recording Functions

Selecting a Drive Mode

You can switch the operation to be performed when you press the shutter
button.
1
Press [
2 Press
[Single]
[Burst] (→53)
[Auto Bracket]
(→54)
[Aspect Bracket]
(→54)
[Self Timer] (→55)
[Panorama
Shot]
∗
Cannot be set when using [Intelligent Auto] Mode.
• The icons in the above table are just examples.
• To cancel drive mode, select [
switched to "Single".
• When you press
Note, however, that you cannot change the settings of [Single] and
[Aspect Bracket].
52
SQT0359 (ENG)
] button ( )
to select the drive mode and press [MENU/SET]
When the shutter button is pressed, only one
picture is recorded.
The pictures are recorded in succession while
the shutter button is pressed.
Each time the shutter button is pressed, the
∗
pictures are recorded with different exposure
settings based on the Exposure Compensation
range.
When the shutter button is pressed, 4 pictures
∗
with 4 different aspect ratios are automatically
recorded.
When the shutter button is pressed, recording
takes place after the set time has elapsed.
The pictures are recorded in succession while
you press the shutter button and move the
∗ camera horizontally or vertically, and then the
(→55)
camera combines the pictures into a single
panorama picture.
, you can change the settings of each drive mode.
] ([Single]) or [ ]. The recording is