Lexicon M300L Owner's Manual page 83

300L Owner's Manual
LFD* (Left Channel Fine)
RFD* (Right Channel Fine)
LFB, RFB, LFF and RFF
4-20
Fine Sample Delays
These can be used for subtle time alignment adjustments. The 300L will correctly
display the resulting time shift as a function of the sampling rate. As many as 500
samples can be added to any stereo/coarse delay setting for a maximum
possible delay per channel of 5 seconds + 500 samples.
48 kHz = 20.833 microseconds per sample
44.1 kHz = 22.676 microseconds per sample
500-sample, 2 samples per step, mono fine adjust for the left channel.
* A quick "double-click" of the slider button will allow you to control the delay in
single sample increments. To exit the extra-fine mode, double-click on the slider
button.
500-sample, 2 samples per step, mono fine adjust for the right channel.
* A quick "double-click" of the slider button will allow you to control the delay in
single sample increments. To exit the extra-fine mode, double-click on the slider
button.
Two feedback paths are available per channel: overall and fine. Overall
feedback is the total delay of DLY + L(R)DL + L(R)FD, and is useful for long echo
effects.
Fine Feedback (LFF and RFF) is only around the Fine Delay and can be used
for very short delay effects and coloration.
All feedback gains are adjustable in 1% increments from -99% to +99%. If the
magnitudes of both feedback gains for a channel sum to more than 100%, that
channel will overload.
On the 300L, overall and fine are differentiated by the following labels:
LFB = Overall Left Channel Feedback
LFF = Fine Left Channel Feedback
RFB = Overall Right Channel Feedback
RFF = Fine Right Channel Feedback
Lexicon