Panasonic PT-DW10000U Operating Instructions Manual page 97

■
Firmware update page
(The firmware should be updated only by an individual with the specialized knowledge required to do this.)
Messages such as the ones shown below appear during data rewriting.
The following message appears upon completion of the version data rewriting.
Enter here the filename of the Enter here the filename of the
firmware to be updated. firmware to be updated.
After entering the filename, press the After entering the filename, press the
[Upload] button. Data transfer is now [Upload] button. Data transfer is now
commenced. commenced.
It will take several dozen seconds for It will take several dozen seconds for
the data to be transferred. the data to be transferred.
The time taken will differ depending The time taken will differ depending
on the network conditions. on the network conditions.
Displays the current version. Displays the current version.
Displays the updated version. Displays the updated version.
Check the updated version against Check the updated version against
the current version, and if everything the current version, and if everything
is in order, press the [OK] button. is in order, press the [OK] button.
Version data rewriting is now Version data rewriting is now
commenced. commenced.
Do not turn off the power while the Do not turn off the power while the
version data is being rewritten. version data is being rewritten.
ENGLISH –
97