Panasonic PT-DW10000U Operating Instructions Manual page 70

Option1 settings (continued)
Auto signal
When unregistered signals are to be input frequently
because the unit is used at conferences or other
venues, the screen display position can be adjusted
automatically without having to press AUTO SETUP
on the remote control each time.
1. Press ▲▼ to select "AUTO
SIGNAL".
OPTION1 OPTION1
COLOR MATCHING COLOR MATCHING
LARGE SCREEN CORRECTION LARGE SCREEN CORRECTION
AUTO SIGNAL AUTO SIGNAL
AUTO SETUP AUTO SETUP
BACK COLOR BACK COLOR
DVI EDID DVI EDID
AUX DVI EDID AUX DVI EDID
P IN P P IN P
FUNC1 FUNC1
OSD POSITION OSD POSITION
OSD MEMORY OSD MEMORY
MENU SELECT MENU SELECT
CHANGE CHANGE
2. Press ◄► to switch "AUTO
SIGNAL".
• The setting will change as follows each time
◄► is pressed.
OFF
• If unregistered signals are input when "ON"
is selected, auto setup will be initiated
automatically.
Automatic adjustment
(Only RGB input)
Use this setting when adjusting a specific or oblong
(16:9, etc.) signal.
1. Press ▲▼ to select "AUTO
SETUP".
OPTION1 OPTION1
COLOR MATCHING COLOR MATCHING
LARGE SCREEN CORRECTION LARGE SCREEN CORRECTION
AUTO SIGNAL AUTO SIGNAL
AUTO SETUP AUTO SETUP
BACK COLOR BACK COLOR
DVI EDID DVI EDID
AUX DVI EDID AUX DVI EDID
P IN P P IN P
FUNC1 FUNC1
OSD POSITION OSD POSITION
OSD MEMORY OSD MEMORY
MENU SELECT MENU SELECT
SUB MENU SUB MENU
ENTER ENTER
70
– ENGLISH
OFF OFF
OFF OFF
OFF OFF
BLUE BLUE
EDID2(PC) EDID2(PC)
EDID2(PC) EDID2(PC)
OFF OFF
P IN P P IN P
2 2
ON ON
ON
OFF OFF
OFF OFF
OFF OFF
BLUE BLUE
EDID2(PC) EDID2(PC)
EDID2(PC) EDID2(PC)
OFF OFF
P IN P P IN P
2 2
ON ON
2. Press ENTER.
• The "AUTO SETUP" screen will be displayed.
AUTO SETUP AUTO SETUP
MODE MODE
CHANGE CHANGE
EXECUTE EXECUTE
ENTER ENTER
3. Press ◄► to switch "MODE".
• The setting will change as follows each time
◄► is pressed.
DEFAULT WIDE
• DEFAULT:
to receive signals of which image aspect is
4:3 or 5:4 (applicable resolution : 640 × 400,
640 × 480, 800 × 600, 832 × 624, 960 × 720,
1 024 × 768, 1 152 × 864, 1 152 × 870,
1 280 × 960, 1 280 × 1 024, 1 600 × 1 200,
1 400 × 1 050
• WIDE:
to receive signals of which image aspect is 16:9
(oblong) (applicable resolution : 720 × 400,
1 280 × 720, 1 280 × 800, 1 280 × 768,
1 376 × 768, 1 600 × 1 024)
• USER:
to receive signals of specific horizontal
resolution (number of horizontally displayed
dots)
4. If "User" is selected, press ◄►
to enter the horizontal resolution
of signal source into "DISPLAY
DOTS".
5. Press ENTER.
• Execute automatic adjustment. A message
"PROGRESS..." appears during automatic
adjustment. When the adjustment is complete,
the system returns to the input screen.
DEFAULT DEFAULT
USER