Panasonic PT-DW10000U Operating Instructions Manual page 117

Model No.
RGB2 input
terminal
Video input/
output terminal
S-video input
terminal
Interface
ports
DVI-D input
terminal
LAN terminal
Serial input/
output terminal
Remote1 input/
output terminal
Remote2 terminal
Length of power supply cord
Cabinet
Outside dimensions
Working environment
condition
Working environment
condition
Power source
Operation range
Remote
Mass
control
Outside
dimensions
Option
*1 Interlace signals are not supported even when the EDID2 mode is selected.
*2 70˝ – 300˝ for ET-D75LE5
*3 If using the projector at high altitudes (1 400 m (4605.3´) - 2 700 m (8881.5´)), the ambient operating
temperature should be 0°-40°C.
PT-D10000U
1 set of high-density, D-sub 15p (female)
[For YP P input]
B R
Y: 1.0 V [p-p] synchronization signal included, P
[For RGB input]
0.7 V [p-p] 75 Ω For G-SYNC: 1.0 V [p-p] 75 Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted
VD: TTL, high-impedance, positive/negative polarity automatically adjusted
• HD/SYNC, and VD terminals are not compliant with 3-value direct SYNC.
1.0 V [p-p] 75 Ω (Active through for Video output)
Y 1.0 V [p-p] C 0.286 V [p-p] 75 Ω Compliant with S1 signals
HDCP (Single link only) compatible
1 set (Used for network connection)
D-sub 9-pin (female/male), RS-232C compliant
Used for personal computer control
Wired remote control, used for link control
Width: 578 mm (22.8˝), Height : 320 mm (12.6˝), Depth: 643 mm (25.3˝)
Ambient temperature
Ambient humidity: 10 % to 80 % (no condensation)
approx. 30 m (98´5˝) (in front of beam receiver)
134 g (0.31 lb) (including dry cells)
Width: 51 mm (2˝), Thickness: 23 mm (0.9˝), Depth: 176 mm (6.9˝)
Hanging attachment (For high ceiling): ET-PKD100H
Hanging attachment (For low ceiling): ET-PKD100S
Projection lens:
DVI-D input module:
SD-SDI input module:
HD/SD-SDI input module:
Replacement Lamp Unit:
PT-DW10000U
: 0.7 V [p-p] 75 Ω
P
B R
1 set BNC
1 set Mini DIN 4p
1 set
DVI 1.0 compliant
10BASE-T/100BASE-TX
PJLink™ compatible
1 set each for M3 pin jack
D-sub 9p (female)
Used for external control
3.0 m (9.1´)
Molded resin
32 kg (71 lb) (without lens)
*3
: 0 °C to 45 °C
3 V DC (two AA dry cells)
ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4,
ET-D75LE5, ET-D75LE6, ET-D75LE8
ET-MD77DV
ET-MD77SD1
ET-MD77SD3
ET-LAD10000 (single bulb),
ET-LAD1000F (4 bulbs)
117
ENGLISH –