Table of Contents
Advertisement
The Add New Hardware Wizard appears. Select
2.
driver for your device
3.
Select
Floppy disk drives
then click
.
Next
Click
. Dual-toned beeps indicate that the modem is enabled.
4.
Finish
Installing Your Network Modem
The network PC Card modem has a 64-pin connector on one end and an
RJ45 (Ethernet) connector on the other end.
The combo PC Card modem (A) shown below has the 68-pin connector on
one end and two ports (B, D) on the other end. The two ports include:
A 15-pin connector port that can be used with a 10BASE-T Ethernet
cable with a 15-pin connector (B) on one end and a RJ45 connector
(C) on the other end.
A 15-pin connector (D) on one end and an RJ11 connector (E) on the
other end for regular telephone lines.
A
, then click
.
Next
, insert the driver diskette into the diskette drive,
B
D
Search for the best
C
E
Chapter 4: Getting Online
47
Advertisement
Table of Contents
