Basic Operation - Sharp AF-W18CME Installation And Operation Manual

BASIC OPERATION

MODE
FAN
SAVE MODE
1H FAN
SWING CANCEL
TIPS ABOUT AUTO MODE
In the AUTO MODE, the temperature setting
and mode are automatically selected depend-
ing on the room temperature when the unit is
turned on.
NOTE:
When the room temperature drops during cooling or dry operation, the operation may turn to
fan mode or the operation may stop automatically.
Downloaded from: http://www.usersmanualguide.com/
TEMP.
TIMER
2
TEMP.
5
3
1
4
Press the MODE button to select the opera-
1
tion mode.
AUTO
Press the ON/OFF button to start operation.
2
•
The red OPERATION lamp on the unit will light
up.
Press the THERMO. button to set the de-
3
sired temperature.
•
In the AUTO and DRY
mode, the temperature
can be changed in 1°C
increments within the
range of 2°C higher to
2°C lower from the
temperature automati-
cally determined by the
air conditioner.
•
In the COOL mode, the
temperature can be set
within the range of 18
°C to 32 °C.
Press the FAN button to set the desired fan
4
speed.
AUTO SOFT
•
In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
To turn off the unit, press the ON/OFF button
5
again.
•
The red OPERATION lamp on the unit will turn off.
Room temperature
at start up
6
COOL DRY
AUTO/DRY MODE
COOL MODE
LOW HIGH
Preset
Mode
temperature
COOL
Room Temp.
DRY