Basic Operation; Operation Condition - Sharp AH-X10 Series Operation Manual

BASIC OPERATION

3

OPERATION CONDITION

Mode
Upper limit
Cooling
Lower limit
• The build-in safety device may prevent the
unit from operating when used out of this
range.
• Condensation may form on the air outlet if the
unit operates continuously in the COOL or
DRY mode when humidity is over 80%.
B129_EN.indd 5
1
2
2
3
1
4
4
Indoor Outdoor
Temp. Temp.
32°C 43°C
21°C 21°C
EN-5
Press the MODE button to select the
operation mode.
FAN AUTO COOL DRY
Press the ON/OFF button to start oper-
ation.
• The green OPERATION lamp (
TO TURN OFF
Press the ON/OFF button again.
• The green OPERATION lamp (
Press the THERMOSTAT button to set the
desired temperature, you can set temper-
ature in 0.5 C increments.
°
(AUTO/DRY mode)
The temperature can be
changed up to ±2.0°C from
the automatic setting.
(COOL mode)
The temperature setting
range: 14.0-30.0°C.
Press the FAN button to set the desired
fan speed.
AUTO BREEZE QUIET SOFT LOW
In FAN mode, fan speed cannot be set to AUTO.
B REEZE QUIET SOFT LOW
NOTE:
AUTO MODE
In the AUTO mode, the temperature setting and
mode are automatically selected according to the
room temperature when the unit is turned on.
DRY MODE
The fan speed is preset to AUTO and cannot be
changed.
BREEZE MODE
Breeze mode reproduces the random variation of
air flow like a natural breeze.
The rhythms have a soothing effect on people.
WHEN POWER FAILURE OCCURS
This air conditioner has a memory function to store
setting when a power failure occurs.
After power recovery, the unit will automatically re-
start in the same settings which were active before
the power failure, except for TIMER, SUPER JET,
BEST SLEEP, BABY MODE, ECO MODE settings.
) will light up.
) will turn off.
HIGH
HIGH
2021/11/10 14:27:23