Denon PMA-1600NE Owner's Manual page 50

Contents Connections
o PC or Mac files cannot be played back
Symptom
This unit is not recognized
0
on the computer.
0
0
0
This unit is not selected as
0
the playback device.
"Unlocked" is displayed.
0
"Unsupported" is
0
displayed.
0
o Audio from digital devices cannot be played back (Coaxial/Optical)
Symptom
"Unlocked" is displayed.
0
"Unsupported" is
0
displayed.
Front panel Rear panel
Playback
Reconnect the USB cable to the USB port on your computer. When this unit is still not recognized after
reconnection, connect to a different USB port.
Restart your computer.
Check the OS of your computer.
When your computer is running on Windows, a dedicated driver software should be installed.
Select this unit as the playback device in the sound settings on the computer.
When digital audio signals cannot be detected properly, "Unlocked" is displayed.
"Unsupported" is displayed when audio signals that are not supported by this unit are input. Check the
settings on your computer or player software.
If the computer you use is "Mac OS", please check if the "PMA-1600NE" format is set below "384000.0
Hz" using the "Audio MIDI Setup".
When digital audio signals cannot be detected properly, "Unlocked" is displayed.
"Unsupported" is displayed when audio signals that are not supported by this unit are input. Check the
audio output signal format from your digital device.
Remote control
unit
Settings
Cause / Solution
Cause / Solution
50
Index
Tips Appendix
Page
Page
24
－
31
32
31
39
39
38
40
40