Denon PMA-1600NE Owner's Manual page 29

Contents Connections
Switching the display's brightness
The brightness of the display can be adjusted to one of four levels.
1
Press DIMMER.
0 The DIMMER button also controls the Denon's Super Audio CD Player
DCD-1600NE, so the DCD-1600NE can be operated simultaneously with this unit.
When the two units have different settings, press and hold in the button for lease 2
seconds to reset them both to the default setting, then make the desired setting.
0 The display brightness is set to most brightly by default.
Front panel Rear panel
Playback Settings
Playing CDs
This section uses playback from a CD as an example.
1
2
3
o Playback in source direct mode
The signal does not pass through the tone adjustment circuitry (BASS,
TREBLE and BALANCE), resulting in playback of a higher sound
quality.
1
29
Remote control
unit
Tips
Press the input source select button (CD) to switch the
input source to "CD".
"CD" is displayed on the display of this unit.
Playback the CD.
Use VOLUME df to adjust the volume.
Press SOURCE DIRECT on the main unit to turn on
source direct mode.
The SOURCE DIRECT indicator lights.
Index
Appendix