Changing Or Updating Network Connections; Accessing The Web Config Utility - Epson Workforce Pro WF-C5790 User Manual

6. Select one of the options shown above, then select the settings you want to use. Contact your
internet service provider if necessary to confirm the authentication method for the email server.
7. Select Proceed to save your settings.
8. Select Close to exit.
9. Select Connection Check to verify the connection to the email server.
Parent topic:
Related tasks
Scanning to Email
Forwarding Received Faxes

Changing or Updating Network Connections

See these sections to change or update how your product connects to a network.

Accessing the Web Config Utility

Changing a USB Connection to a Wi-Fi Connection
Changing a Wi-Fi Connection to a Wired Network Connection
Connecting to a New Wi-Fi Router
Disabling Wi-Fi Features
Parent topic:
Accessing the Web Config Utility
You can select your product's network settings and confirm its operating status using a web browser.
You do this by accessing your product's built-in Web Config utility from a computer or other device that is
connected to the same network as your product.
Note: For more information on the Web Config utility, see the
1. Print a network status sheet.
2. Locate the IP address for your product that is listed on the network status sheet.
3. On a computer or other device connected to the same network as your product, open a web
browser.
4. Enter your product's IP address into the address bar.
You see the available Web Config utility options.
Wi-Fi or Wired Networking
Wi-Fi or Wired Networking
Administrator's
59
Guide.