Wireless Mac Filtering - TP-Link TD-W9980B User Manual

TD-W9980B
•
Key Type: You can select the WEP key length (64-bit, or 128-bit.) for encryption.
"Disabled" means this WEP key entry is invalid.
64-bit: You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 5 ASCII characters.
128-bit: You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 13 ASCII characters.

Note:
If you do not set the key, the wireless security function is still disabled even if you have selected
Shared Key as Authentication Type.
Be sure to click the Save button to save your settings on this page.

4.9.4 Wireless MAC Filtering

Choose menu "Wireless 5GHz"  "Wireless MAC Filtering", you can control the wireless access
by configuring the Wireless MAC Filtering function, shown in Figure 4-42.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.

MAC Address: The wireless station's MAC address that you want to filter.

Status: The status of this entry, either Enabled or Disabled.

Description: A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New button. The following page will
appear, shown in Figure 4-43:
To add or modify a MAC Address Filtering entry, follow these instructions:
N600 Wireless Dual Band Gigabit VDSL2 Modem Router (Annex B) User Guide
Figure 4-51
Figure 4-52
64