Dell S2718HN User Manual page 39

Dell S2718HN/NX
If VGA or HDMI cable is not connected, a floating dialog box as shown below appears.
The monitor will enter Power Save Mode after 4 minutes if left at this state.
Dell S2718HN/NX
Dell S2718HN/NX
See Troubleshooting
No VGA signal from your device.
?
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
? No VGA Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/monitors
? No HDMI Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/monitors
for more information.
or
Operating your monitor
39
|