Dell S2718HN User Manual page 33

Display
Aspect Ratio
Horizontal
Position
Vertical Position
Sharpness
Pixel Clock
Phase
Dynamic
Contrast
Response Time
Reset Display
Use the display to adjust image.
Dell S271S2718HN/NX
Brightness / Contrast
Auto Adjust
Input Source
Color
Display
Energy
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
Adjusts the image ratio to Wide 16:9, 4:3 or 5:4.
Use or the buttons to adjust image left and right.
Minimum is 0 (-). Maximum is 100 (+).
Use the or
Minimum is 0 (-). Maximum is 100 (+).
This feature can make the image look sharper or softer.
Use or to adjust the sharpness from 0 to 100.
The phase and pixel clock adjustments allow you to adjust
your monitor to your preference. Use
adjust for best image quality. Minimum is 0 (-). Maximum
is 100 (+).
NOTE: Applicable when input port is VGA.
If satisfactory results are not obtained using the phase
adjustment, use the pixel clock (coarse) adjustment and
then use phase (fine), again. Minimum is 0 (-). Maximum is
100 (+).
NOTE: Applicable when input port is VGA.
Allows you to increase the level of contrast to provide
sharper and more detailed image quality.
Press the button to select the dynamic contrast on or
off.
NOTE: Dynamic contrast provides higher contrast if you
select game or movie preset mode.
User can select between Normal or Fast.
Select this option to restore default display settings.
Energy Use
Aspect Ratio
Horizontal Position
Vertical Position
Sharpness
Pixel Clock
Phase
Dynamic Contrast
Response Time
Reset Display
buttons to adjust image up and down.
Operating your monitor
Wide 16:9
50
50
50
50
26
Normal
or buttons to
33
|