Dell S2718HN User Manual page 37

DDC/CI
LCD
Conditioning
Reset Other
Factory Reset
NOTE: Your monitor has a built-in feature to automatically calibrate the
brightness to compensate for LED aging.
DDC/CI (display data channel/command interface) allows
your monitor parameters (brightness, color balance and
etc.) to be adjustable via the software on your computer.
You can disable this feature by selecting disable.
Enable this feature for best user experience and optimum
performance of your monitor.
Dell S2718HN/NX
Brightness / Contrast
Auto Adjust
Input Source
Color
Display
Energy
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
Helps reduce minor cases of image retention. Depending
on the degree of image retention, the program may
take some time to run. To start LCD conditioning, select
Enable.
S2718HN/NX
Brightness / Contrast
Auto Adjust
Input Source
Color
Display
Energy
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
Reset all settings under the Others setting menu to the
factory preset values.
Reset all settings to the factory preset values.
Energy Use
DDC/CI Enable
Disable
LCD Conditioning
Reset Others
Factory Reset
Energy Use
DDC/CI
LCD Conditioning Enable
Reset Others
Factory Reset
Operating your monitor
37
|