Call Indicator - Fujitsu P24T-7 LED Operating Manual

Having this problem?
Picture disturbances (horizontal lines, picture
noise)
The screen becomes darker
Screen display suddenly becomes darker during
operation and then suddenly goes black after a
certain amount of time.

Call Indicator

Having this problem?
Call Indicator P24T-7 not recognised by the
operating system
Call Indicator status indicator is not showing a
status
Nothing is heard from the other side during a call ► In Microsoft Lync, check whether the USB
No ring tone for an incoming call via Microsoft
Lync
Fujitsu
Check the following points:
► Press the
AUTO
auto-adjustment of the screen.
The background lighting has a limited lifetime.
If your monitor display should become too dark,
the background lighting will have to be replaced.
► Contact our Service Desk.
► Reset your distance to the display using the
Proximity setting in the OSD menu.
► Increase the setting until the setting bar
projects over the detected distance.
Check the following points:
► Check if the monitor is connected to the
computer using the supplied USB cable.
► Check if Call Indicator is enabled in the
OSD menu.
► Check if Microsoft Lync is installed on the
computer.
► Check if Microsoft Lync has been executed
and you are logged on.
► Check if the monitor is connected to the
computer using the supplied USB cable.
► Check if all the audio devices with the name
"Call Indicator P24T-7" are enabled in the
Windows sound settings.
headset or USB telephone conference
system in use is selected as the primary
device for voice calls.
"Call Indicator P24T-7" must not be selected
as the primary device for voice calls.
► Check if Call Indicator P24T-7 is selected in
Microsoft Lync as a "secondary device".
Troubleshooting
button to conduct the
39