Fujitsu P24T-7 LED Operating Manual page 21

1
2
1 = Security slot for Security Lock
2 = Power connector
3 = DisplayPort socket
4 = HDMI socket
5 = DVI-D socket (DVI)
► Select the appropriate data cable for your computer.
► Connect one of the connectors of the data cable to the DVI-D or DisplayPort socket of the
monitor and secure the DVI-D plug-in connection by tightening the safety screws.
The monitor automatically detects the input (VGA, DVI, HDMI, DisplayPort)
when only one signal source is connected.
► Insert one connector of the audio line into the AUDIO IN (7) socket on the
monitor and make sure it is properly engaged.
► Plug the power cable supplied into the power connector of the monitor.
► Plug the supplied USB 3.0 cable into the USB 3.0 (upstream) socket (9) and the
other end of the cable into a USB 3.0 socket on the computer.
Connect the USB keyboard and USB mouse directly to the PC, as the USB connector
socket of the monitor is switched off in energy-saving mode.
► Use the cable retainer at the foot of the monitor to secure the connected cables.
Fujitsu
3 4 5 6 7 8 9
6 = D-SUB socket (VGA)
7 = AUDIO-IN socket
8 = AUDIO-OUT socket
9 = USB 3.0 (upstream)
10 = USB 3.0 (downstream)
Getting started
10
10
17