Changing The Monitor Settings - Fujitsu P24T-7 LED Operating Manual

Operation
Incoming calls are indicated by the communication software as a ring tone over the monitor
speakers. The ring tone also sounds under the following conditions:
• USB headset or USB telephone conference system not currently being used.
• The computer is set to silent.
• The monitor is in energy-saving mode (network indicator: orange).
Call Indicator is currently working with only the Microsoft Lync communication software.
Always use Call Indicator together with a USB headset or a USB telephone
conference system that you have connected to your computer. The monitor
cannot be used as a communication device.
In your communication software under Audio Devices, enable Call
Indicator as a "Secondary Device". When there are incoming calls, the
ring tone sounds over the monitor speakers.
Follow these instructions when using Call Indicator:
• Connect the monitor to the computer using the supplied USB cable as well.
• Enable the Call Indicator function via the On-Screen Display (OSD) menu.

Changing the monitor settings

When putting the monitor into operation for the first time, the screen display should
be optimally adapted to the display adapter used.
26 Fujitsu