30" ELECTRIC RANGE INSTALLATION INSTRUCTIONS
C. Level and position the range
its final position. Insert the range leveling leg in the anti-tip
bracket. Visually verify if the anti-tip bracket is engaged.
Lower the range by adjusting the 4 leveling legs alternatively
until the range is level. Check if the range is level by placing
a spirit level on the oven rack. Take 2 readings with the spirit
level placed diagonally; take a reading in one direction and
then in the other direction. Level the range if necessary by
adjusting the leveling legs.
Range side
Figure 4
Leg
Leveler
- Slide range to
Figure 3
Raise
Lower
Figure 5
4. Serial Plate Information
The serial plate is
located as shown.
See the serial plate
for the following
information:
A. Model, lot and serial
number of range.
B. Kilowatt rating (power
requirements).
C. Voltage ratings.
3
Figure 5