Dukane 6660WUSSB User Manual page 104

[SSID]
[SECURITY]
[SIGNAL LEVEL]
[VERSION(1)]
[FIRMWARE] Version
[VERSION(2)]
[FIRMWARE2] Version
[OTHERS]
[DATE TIME]
[HOST NAME]
[SERIAL NUMBER]
[CONTROL ID] (when [CONTROL ID] is set)
[CONDITIONS]
[INTAKE TEMPERATURE]
[INSTALLATION POSITION]
[Y-AXIS]
About the X-AXIS, Y-AXIS and Z-AXIS CONDITIONS
(NOTE) Arrow direction of the Z-AXIS in the figure represents the top of the projector.
X-AXIS Display the projector image at an angle of −100 – +100
degrees to the horizontal in the X-axis direction.
Y-AXIS Display the projector image at an angle of −100 – +100
degrees to the horizontal in the Y-axis direction.
Z-AXIS Display the projector image at an angle of −100 – +100
degrees to the vertical in the Z-axis direction.
[NETWORK TYPE]
[CHANNEL]
[DATA] Version
[DATA2] Version
[PROJECTOR NAME]
[MODEL NO.]
[LAN UNIT TYPE]
[EXHAUST TEMPERATURE]
[X-AXIS]
[Z-AXIS]
X-AXIS value of
the projector
Horizontal plane
X-axis
Y-AXIS value of
the projector
Horizontal plane
Y-axis
Z-AXIS value of the projector
Horizontal
plane Z-axis
84
4. Using On-Screen Menu
Gravity direction
Gravity direction
Gravity direction