Dukane 6660WUSSB User Manual page 101

Table of Contents

Advertisement

NOTE:
• This function will not be available under the following conditions:
- when a component signal is applied to the COMPUTER IN terminal
- when a Sync on Green RGB signal or composite sync signal is applied
• To enable the [AUTO POWER ON] after changing to the sleep mode turning off the projector, wait 30 seconds and input a computer
or HDMI signal.
If a computer or HDMI signal is still present when the projector is turned off, the [AUTO POWER ON] will not work and the projector
remains in standby mode.
• Depending on the projector in use, the [AUTO POWER ON] may not work properly.
In this case, set [STANDBY MODE] to [NETWORK STANDBY].
Enabling Power Management [AUTO POWER OFF]
When this option is selected you can enable the projector to automatically turn off (at the selected
time: 0:05, 0:10, 0:15, 0:20, 0:30, 1:00) if there is no signal received by any input or if no operation
is performed.
Selecting Default Source [DEFAULT INPUT SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST
AUTO
HDMI1
HDMI2
COMPUTER
HDBaseT
USB-A
LAN
Setting carbon footprint factor [CARBON CONVERT]
Adjusts the carbon footprint factor in the carbon saving calculation. The initial setting is 0.505[kg-
CO2/kWh] based on the CO
Selecting your currency [CURRENCY]
Displays electricity pricing (available in 4 currency units).
$
JP¥
RMB¥
Sets the projector to default to the previous or last active input each time the projector is turned on.
Searches for an active source in order of [HDMI1] → [HDMI2] → [COMPUTER] → [HDBaseT] →
[USB-A] → [LAN] and displays the first found source.
Displays the digital source from the HDMI 1 IN terminal every time the projector is turned on.
Displays the digital source from the HDMI 2 IN terminal every time the projector is turned on.
Displays the computer signal from the COMPUTER IN terminal every time the projector is turned on.
Projects the signal transmitted from the terminals supported HDBaseT.
Display the [VIEWER].
Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit.
Emissions from Fuel Combustion (2008 Edition) published by OECD.
2
US Dollar
EU Euro
Japanese Yen
Chinese Yuan
81
4. Using On-Screen Menu

Advertisement

Table of Contents
loading

This manual is also suitable for:

6652wussb6652wssb

Table of Contents