Samsung Xpress M268 Series User Manual page 67

Basic faxing
5 Press (Start) on the control panel. The machine starts to scan and
send the fax to the destinations.
• If you want to send a fax directly from your computer, use
Network PC Fax (see "Sending a fax in the computer" on page 254).
• When you want to cancel a fax job, press
machine starts transmission.
• If you used the scanner glass, the machine shows the message asking to
place another page.
Sending a fax manually
Perform the following to send a fax using
panel. If your machine is a handset model, you can send a fax using the handset
(see "Features by model" on page 7).
Place a single document face down on the document glass, or load the
1
documents face up into the document feeder (see "Loading originals" on
page 52).
2 Select (fax) on the control panel.
3 Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 68).
4 Press (On Hook Dial) on the control panel or lift the handset.
Samsung
(Stop/Clear) before the
(On Hook Dial) on the control
5 Enter a fax number using the number keypad on the control panel.
6 Press (Start) on the control panel when you hear a high-pitched fax
signal from the remote fax machine.
Sending a fax to multiple destinations
You can use the multiple send feature, which allows you to send a fax to multiple
locations. Originals are automatically stored in memory and sent to a remote
station. After transmission, the originals are automatically erased from memory
(see "Features by model" on page 7).
You cannot send faxes with this feature if you have chosen super fine as an
option or if the fax is in color.
1 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
2 Select (fax) on the control panel.
3 Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 68).
4 Select (Menu) > Fax Feature > Multi Send on the control panel.
2. Menu Overview and Basic Setup
67