Table of Contents
Advertisement
Settings & Upgrade
7
Select Save → Ok to save and restart.
• To enable the Password On Boot option, set a
Supervisor Password and enter the password when
starting up the computer.
• For some models, if the password entered message
appears in the Setup Notice window, select Ok to
complete the setup.
Removing a password
1
Turn on the computer.
2
Before the Samsung logo appears, press the F2 key several
times.
3
Access the Security menu.
4
Select a password type (Supervisor Password and User
Password).
5
Enter the current password and select Ok.
6
Without entering any characters, select Ok → Ok.
7
Select Save → Ok to save and restart.
For some models, to cancel the password, select Cancel in
the Setup Notice window.
Boot priority
Change the boot priority from the BIOS setup.
1
Turn on the computer.
2
Before the Samsung logo appears, press the F2 key several
times.
3
Access the Boot menu.
4
Select Boot Device Priority.
5
Select an option menu to open the list.
6
Select an option.
7
Select Save → Ok to save and restart.
Select Exit → Ok to restart without saving the changes.
50
Advertisement
Table of Contents
