Paper Ejection Problems; Solving Problems Printing From A Computer; Nothing Prints - Epson C11CH43402 User Manual

Parent topic:

Paper Ejection Problems

If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.
Select the correct paper size when you reprint.
• If paper falls from the output tray, extend the paper stopper.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select
the correct paper type setting when you reprint.
Parent topic:
Related references
Paper Jam Problems Inside the Product
Paper or Media Type Settings - Printing Software
Paper or Media Type Settings - Control Panel
Paper Loading Capacity
Related topics
Loading Paper

Solving Problems Printing from a Computer

Check these sections if you have problems while printing from your computer.
Note: When printing using AirPrint, the available print settings are different from those covered in this
manual. See the Apple website for details.

Nothing Prints

Product Icon Does Not Appear in Windows Taskbar
Printing is Slow
Parent topic:
Nothing Prints
If you have sent a print job and nothing prints, try these solutions:
• Make sure your product is turned on and connected to your computer.
• Make sure any interface cables are connected securely at both ends.
Solving Paper Problems
Solving Paper Problems
Solving Problems
199