Sony FST-SH2000 Operating Instructions Manual page 15

Transferring music from a disc
You can easily transfer all the music on a
disc to a USB device (CD-USB
Synchronized Transfer). You can also
transfer a single track or MP3 file during
playback (REC1 Transferring).
1
Connect a transferable USB
device to the
shown below.
2
Press CD.
3
Insert the disc you want to
transfer.
4
For CD-USB Synchronized
Transfer:
When playback is stopped, press
PLAY MODE on the remote control
repeatedly to select the play mode you
want.
Note
If you start transferring in Shuffle Play or
Repeat Play, the selected play mode is
automatically changes to Normal Play.
For REC1 Transferring:
Select the track or MP3 file you want
to transfer, then start playback.
5
Press REC TO USB B.
"PUSH ENTER" appears in the
display panel.
B port as
USB device
6
Press ENTER.
Transferring starts when "DON'T
REMOVE" appears in the display
panel.
For CD-USB Synchronized
Transfer:
When the transferring is completed,
the disc and the USB device stop
automatically.
For REC1 Transferring:
When the transferring is completed,
the disc continues to play.
Transferring analog audio
(Analog Transferring)
You can transfer the sound from analog
audio sources (other than CD and USB
function) to a USB device.
1
Connect a transferable USB
device to the
unit (page 15).
2
Press FUNCTION repeatedly to
select the source you want to
transfer.
3
Press REC TO USB B.
"PUSH ENTER" appears in the
display panel.
4
Press ENTER.
Transferring starts when "DON'T
REMOVE" appears in the display
panel.
5
Start playback the source.
To stop transferring
Press x.
B port on the
l
Continued
15
GB