― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1 1
Attach the stand to the back of the monitor, in the
direction of the arrow.
5
Insert the stand base into the stand neck in the
direction shown in the figure.
2
Use the screws on the stand to tightly fasten.
6
Attach the stand base to the stand neck, and then
fasten the two screws on the base to tightly fix it.
3
Attaching the COVER-REAR TOP to the stand neck,
as shown in the figure.
Caution
Do not press down on the monitor. There is a risk of