Installation; Assembling The Stand Base - Samsung C HG7 Series User Manual

Installation

Assembling the Stand base

― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
Open the packaging. Be careful when using a sharp
object to open the packaging. The product may be
damaged.
Put your hands in the grooves on either side of the
top layer of styrofoam covering the product and
remove it.
5
Attach the stand base to the stand neck, and then
fasten the two screws on the base to tightly fix it.
2
While pressing down with one hand on the lower
styrofoam layer, lift the stand's neck with the other
hand.
― Keep the stand base within the platform to prevent
it falling off and causing injury.
3
Rotate the stand neck 90° counterclockwise
and put the connecting area on the edge of the
packaging.
6
The stand is now completely assembled.
4
Attach the stand base to the neck, as shown in
the image. Make sure there is no gap between the
stand neck and base.
Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
17