Screen Capture Function
1 . Press the MENU button. Then, move to OPTION with the ∧, ∨, <,
> buttons and press the ◉OK button.
2 . Press the ∧, ∨ buttons to move Screen Capture and press the
◉OK button.
•
It can only be selected when there is an input signal.
•
It may take up to 2 minutes to save the screen capture.
•
Press the BACK button to exit the menu screen.
To adjust the brightness of the screen
1 . Press the Q.MENU button on the remote control.
2 . Press the <, > buttons to move LED Mode.
3 . Move to a desired item with the ∧, ∨ buttons.
•
LED Mode changes into Dimming mode automatically at specific temperatures
(37°C or higher).
•
LED Mode changes into Dimming mode automatically if use a portable battery.
You can also use this function through the MENU button.
•
•
Press the BACK button to exit the menu screen.
Operating the Projector
OPTION
Menu Language
:English
Audio Language
:English
Caption
:Service1
Blank Image
:Blue
Screen Capture
LED Mode
:Normal
Auto Power
:Off
Demo Mode
:Off
Initial Setting
:Home Use
LED Mode
Normal
ꔂMove ꔉOK
CH
31