Turning On The Projector; Turning Off The Projector; Focus And Position Of The Screen Image; Selecting Input Mode - LG HX350T Owner's Manual

Installation

Turning on the Projector

1 . Make sure the power cord is connected correctly.
2 . After wait for a moment, press the POWER button on the top cover or the POWER button on the remote
control. (The light on the control panel will be turned on.)
Press the INPUT button on the remote control to select the input signal you want.
•
When you press the POWER button on the remote control or the POWER button on the control panel when you
•
turn on the projector, the lights for POWER and MENU buttons on the control panel will be turned on.
• Check if the lens door is open before turning on the power.

Turning off the Projector

Press the POWER button on the top cover or the POWER button on the remote control.

Focus and Position of the Screen Image

When an image appears on the screen, check if it is in focus and fits the screen properly.
• To adjust the focus of the image, rotate the focus ring.

Selecting input mode

1 . Press the INPUT button on the remote control.
2 . Selecting an input signal with the INPUT button will only change the projector only to connected inputs. You
can change it to any inputs with the ＜, ＞ button.
Input
TV
• The component input is always active.
You can also use this function through the MENU button.
•
14
Focus ring
Video Component RGB-PC HDMI