Basic Settings - Kawai Concert Artist CA59 B Owner's Manual

Basic Settings

Basic Settings Basic Settings
The Basic Settings menu contains settings to adjust the pitch, tuning, and general sound of the instrument.
This menu also allows favourite panel settings to be stored, or reset back to the original factory configuration.
 Basic Settings
No. Setting
1 Key Transpose
2 Song Transpose
3 Tone Control
4 Speaker Volume
5 Low Volume Balance
6 Tuning
7 Damper Hold
8 Split
9 Four Hands
10 Startup Setting
11 Factory Reset
12 Auto Display Off
13 Auto Power Off
* Default settings will be shown in the first LCD display illustration (i.e. Step 1) for each setting explanation below.
 Entering the Basic Settings menu
While the normal playing mode screen is shown in the LCD display:
Press the FUNCTION button (MENU).
The Function menus will be shown in the LCD display.
Press the FUNCTION button (ENTER) again to enter the Basic
Settings menu.
 Selecting and adjusting the desired setting
After entering the Basic Settings menu:
Press the  or  buttons to move the selection cursor over the
desired setting.
Press the  or  buttons to adjust the selected setting.
* To reset the current setting to the default value, press the  and 
buttons simultaneously.
66
Description
Raise or lower the pitch of the keyboard in semi-tone steps.
Raise or lower the pitch of the recorder/MIDI song in semi-tone steps.
Change the EQ settings of the instrument's sound.
Change the maximum volume level of the speaker output.
Change the difference in volume between pianissimo and fortissimo playing.
Raise or lower the pitch of the instrument in 0.5 Hz steps.
Change the effect of pressing the sustain pedal on organ, string, etc. sounds.
Enable the "Split Mode" function.
Enable the "Four Hands Mode" function.
Store current panel settings as the default (power-on) configuration.
Restore all panel settings to the original factory configuration.
Enable/disable the instrument's Auto Display Off function.
Enable/disable the instrument's Auto Power Off nergy saving function.
Default setting
0 (C)
0
Flat
Normal
3
440.0 Hz
Off
Off
Off
-
-
5 min.
-
 buttons:
Adjust selected setting.
  buttons:
Move selection cursor.