Kawai Concert Artist CA59 B Owner's Manual page 139

 USB (memory device)
Issue
A USB memory device is not detected, cannot
be saved to, or does not appear to function
when connected to the "USB to Device" port.
The instrument pauses briefly when
connecting a USB memory device.
 USB MIDI, MIDI, Bluetooth® MIDI
Issue
The instrument is connected to the computer
using a USB cable (or a USB-MIDI adaptor),
however the software does not respond to key
presses.
The instrument cannot connect to the smart
device/app via Bluetooth.
 MP3/WAV/SMF files
Issue
No sound can be heard when playing an MP3
or WAV audio file stored on a USB memory
device.
An MP3/WAV audio file stored on a USB
memory device sounds strange, or does not
play back correctly.
When recording MP3/WAV audio files, the
volume is too low/too high (distorted).
Possible Cause and Solution
Check that the USB memory device is formatted to use the FAT/FAT32
filesystem, and not set to "Write Protect" mode.
Disconnect the USB memory device, turn the instrument off t en
on, then reconnect the USB device. If the USB device still does not
function, it may be damaged or incompatible. Please try using a
different USB device.
This is recognised behaviour when using large capacity (e.g. 8GB+)
USB memory devices.
Possible Cause and Solution
Check that a USB MIDI driver is installed on the computer.
Check that "USB Audio Device" or "KAWAI USB MIDI" is selected in the
software's input/output device settings.
Check that the instrument is not connected to a smart device using
Bluetooth MIDI.
Check that the instrument's Bluetooth Audio/MIDI function is turned On.
Ensure that the mobile device's Bluetooth function is turned On.
Try deleting the instrument's Bluetooth connection using the mobile
device's "Forget Device" function.
Try turning the instrument Off nd then On, and/or restarting the
mobile device.
Possible Cause and Solution
Check that the audio player volume is not set to 0.
Check that the format of the audio fi e is supported and listed in the
"Audio Player supported format specifications" table.
Check that the format of the audio fi e is supported and listed in the
"Audio Player supported format specifications" table.
The file transfer speed of the USB memory device may be too slow to
play the audio file. Please try using a different USB memory device,
ensuring that it conforms to USB2.0 Hi-Speed standards.
Check the gain setting before recording the audio, and if necessary
adjust to increase/decrease the recording level.
Page no.
p. 137
–
–
Page no.
p. 113
p. 113
p. 130
p. 130
–
–
–
Page no.
p. 59
p. 58
p. 58
p. 137
p. 56
139