Audio V Fade Function - Panasonic AJSD930P Operating Instructions Manual

Audio V fade function

When editing tapes, the edit point splicing selection
(setup menu No. 311 and 312) information is recorded
on the tape. This information is then sensed during
playback, and V fade or cut processing is
automatically performed for these sections.
However, only when the playback fade selection (No.
727) is AUTO.
When the edit point splicing selection (setup
menu No. 311 and 312) is CUT
Audio signal A
Noise appears at the edit splice.
When the edit point splicing selection (setup
menu No. 311 and 312) is FADE
Audio signal A
V fade is performed instantaneously to
eliminate the noise.
<Notes>
O When the playback fade selection (No. 727) is
CUT, cut processing is performed for all splices.
O When the playback fade selection (No. 727) is
FADE, V fade processing is performed for all
splices.
60
Audio signal B
Audio signal B